BKZSW - DMF DIMETHYL FORMAMIDE, DX1730

  • MSDS: BKZSW
  • Manufacturer: EM SCIENCE
  • Product Name: DMF DIMETHYL FORMAMIDE, DX1730
  • National Stock Number: 6810-00N018454
Product Identification

Product ID:DMF DIMETHYL FORMAMIDE, DX1730
MSDS Date:10/27/1987
FSC:6810
NIIN:00N018454
MSDS Number: BKZSW

Responsible Party
EM SCIENCE
480 DEMOCRAT ROAD
GIBBSTOWN, NJ 08027
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 608-354-9200

Cage: DO242

Contractor
EM SCIENCE
3969 GIBBSTOWN, NJ 08927 US

Telephone: 800-424-9300 (CHEMTREC)

Cage: DO242

Ingredients

DIMETHYLFORMAMIDE

CAS: 68-12-2

RTECS: LQ2100000

OSHA PEL S, 10 PPM

ACGIH TLV: S, 10 PPM; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Hazards

LD50 LC50 Mixture:LD50:(ORAL RAT) 2800 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:HIGHLY IRRITATING & HARMFUL IF
SWALLOWED, INHALED OR ABSORBED THRU SKIN. PRLNGD EXPOS MAY CAUSE
SEV LIVER DAM. MAY ALSO DAM KIDNEYS, LUNGS & BONE MARROW. MAY CAUSE
DIZZ, HDCH, NAUS, POSS UNCON & EVEN ASPHY. RUSSIAN LITERATURE FROM
1975 INDICATES THAT EXPOS TO DMF CAUSED INCRD EMBRYO MORTALITY IN
(SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:DIMETHYL FORMAMIDE: GROUP 2B (IARC)
Effects of Overexposure:HLTH HAZ:LAB RATS. MORE RECENT STUDIES INDICATE
THAT DMF DOES NOT PRESENT A SPEC RISK TO THE FETUS WHEN THE PROPER
PROT EQUIP IS USED TO MAINTAIN EXPOS LEVELS BELOW THE OSHA EXPOS
LIMITS.
Medical Cond Aggravated by Exposure:PREGNANCY & LIVER CONDITION.

First Aid

First Aid:GET MD FOR ALL CASES OF OVEREXPOS. SKIN: IMMEDIATELY FLUSH
THOROUGHLY W/LARGE AMOUNTS OF WATER. EYE:IMMEDIATELY FLUSH
THOROUGHLY W/LARGE AMOUNTS OF WATER FOR AT LEAST 15 MINUTES. INHAL:
REMOVE TO FRES H AIR; GIVE ARTIFICIAL RESPIRATION IF BREATHING HAS
STOPPED. INGEST:DO NOT INDUCE VOMITING; GET MD IMMEDIATELY. REMOVE
CONTAMINATED CLOTHING & WASH BEFORE REUSE. DESTROY CONTAMINATED
SHOES.

Fire Fighting

Flash Point Method:TCC
Flash Point:138F,59C
Lower Limits:2.2%
Upper Limits:15.2%
Extinguishing Media:"ALCOHOL" FOAM, CO2, DRY CHEM; WATER SPRAY TO COOL
FIRE-EXPOSED CONTRS; EVACUATE ENCLSD AREAS; FIGHT FROM UPWIND.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:VAPOR CAN TRAVEL DISTANCES TO IGNITION
SOURCE & FLASH BACK.

Accidental Release

Spill Release Procedures:DIKE SPILL; TAKE UP W/ABSORBENT; CONTAINERIZE
FOR PROPER DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN A COOL AREA AWAY FROM
IGNITION SOURCES & OXIDIZERS. KEEP CONTAINER TIGHTLY CLOSED. DO NOT
TAKE INTERNALLY. DO NOT BREATHE VAPOR.
Other Precautions:DO NOT GET IN EYES, ON SKIN OR ON CLOTHING. RETAINED
RESIDUE MAY MAKE EMPTY CONTAINERS HAZARDOUS; USE CAUTION! TESTS ON
LAB ANIMALS INDICATE MATERIAL MAY PRODUCE ADVERSE MUTAGENIC AND
REPRODUCTIVE EFF ECTS.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR MUST BE WORN IN
THE ABSENCE OF ADEQUATE VENTILATION.
Ventilation:MATERIAL MUST BE HANDLED OR TRANSFERRED IN AN APPROVED FUME
HOOD OR W/EQUIVALENT VENTILATION.
Protective Gloves:BUTYL OR EQUIVALENT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE CLOTHING (IMPERVIOUS) SHOULD BE
WORN WHEN HNDLG THIS MATL. EYE WASH & SAFETY EQUIP SHOULD BE
READILY AVAIL.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
MATLS TO AVOID:TRIETHYL, THIONYL CHLORIDE & HALOGENATED HYDROCARBONS.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:307F,153C
Melt/Freeze Pt:M.P/F.P Text:-78F,-61C
Vapor Pres:2.6
Vapor Density:2.5
Spec Gravity:0.949
Evaporation Rate & Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:MISCIBLE
Appearance and Odor:COLORLESS LIQUID; FAINT AMINE ODOR.
Percent Volatiles by Volume:100

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZERS, CHLORINATED SOLVENTS, INORGANIC NITRATES, CHLORINE, BROMINE,
SODIUM BOROHYDRIDE, ALUMINUM (SEE SUPP DATA)
Stability Condition to Avoid:HEAT & OPEN FLAME. MOISTURE (MATERIAL IS
HYGROSCOPIC).
Hazardous Decomposition Products:COX & DIMETHYLAMINE.

Disposal

Waste Disposal Methods:TO BE PERFORMED IN COMPLIANCE W/ALL CURRENT
LOCAL, STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.